1. Ta strona wykorzystuje ciasteczka (cookies) w celu: utrzymania sesji zalogowanego Użytkownika, gromadzenia informacji związanych z korzystaniem z serwisu, ułatwienia Użytkownikom korzystania z niego, dopasowania treści wyświetlanych Użytkownikowi oraz tworzenia statystyk oglądalności czy efektywności publikowanych reklam.Użytkownik ma możliwość skonfigurowania ustawień cookies za pomocą ustawień swojej przeglądarki internetowej. Użytkownik wyraża zgodę na używanie i wykorzystywanie cookies oraz ma możliwość wyłączenia cookies za pomocą ustawień swojej przeglądarki internetowej. Dowiedz się więcej.

RGH JAsper 512MB nie moge utworzyć pliku ecc

Temat na forum 'Dla świeżaków' rozpoczęty przez pawel_wolomin, Czerwiec 18, 2012.

  1. pawel_wolomin

    pawel_wolomin Świeżak Świeżak

    Dołączył:
    Sierpień 31, 2009
    Posty:
    18
    Polubienia:
    0
    Punkty za osiągnięcia:
    1
    Witam mam problem z utworzeniem pliku ecc z pamieci nand z konsoli jasper 512mb

    log z programu xeBuild


    ==================================
    Swizzy's xeBuild GUI version 2.04
    Log Started: Monday 2012-06-18 17:08:42
    ==================================

    *** Some console information ***
    CB Version: 6753


    Copying nand to ecc directory, this may take a while... Done!

    Parameters sent to python:

    build.py nanddump.bin cd\CDjasper xell-gggggg.bin

    Building nand using build.py (this may take a while):

    * found flash image, unpacking...
    ECC'ed - will unecc.
    Found 2BL CB_A (build 6753) at 00008000
    Found 2BL CB_A (build 6753) at 00009fc0
    Found 4BL CD (build 6753) at 00013680
    Found 5BL CE (build 1888) at 00018700
    * found decrypted CD
    * found XeLL binary, must be linked to 1c000000
    * we found the following parts:
    SMC: 2.3
    CB_A: 6753
    CB_B: 6753
    EXT_CB_A: missing
    EXT_CB_B (decrypted): missing
    EXT_CB_B (decrypted): missing
    CD (image): 6753
    CD (decrypted): 8453
    * decrypting...
    * checking if all files decrypted properly... ok
    * checking required versions... ok
    * patching SMC...
    * patching Jasper version 2.3 SMC at offset 0x12ba... done!
    * this image will be valid *only* for: Jasper
    * patching CB_B...
    ERROR: Unkown error!, exitcode: 1
    ERROR: There was one or more fatal errors: 1 errors during the build process
    Traceback (most recent call last): File "build.py", line 465, in <module> if check_CB_Build(build(CB_B)): File "build.py", line 450, in check_CB_Build assert found, "Can't Glitch that CB"AssertionError: Can't Glitch that CBCleaning data and temporary directories... Done!


    ****** The app has now finished! ******

    . Done!
     
  2. Lotnik421 Xbox One

  3. madluxx

    madluxx Użytkownik Użytkownik

    Dołączył:
    Marzec 1, 2009
    Posty:
    169
    Polubienia:
    17
    Punkty za osiągnięcia:
    18
    Płeć:
    Mężczyzna
    Miasto:
    KATO
    Spróbuj moze nowszym xeBuild'em
     
  4. pawel_wolomin

    pawel_wolomin Świeżak Świeżak

    Dołączył:
    Sierpień 31, 2009
    Posty:
    18
    Polubienia:
    0
    Punkty za osiągnięcia:
    1
    log z najnowszego xeBuildn 2.061

    This means the log will NOT contain information from your keyvault, it can be caused by etheir badkey or b*******/corrupt keyvault
    Using xell-reloaded for Glitch hack
    Including dashlaunch... Done!
    Including custom dashlaunch settings (launch.ini)... Done!
    Copying nand to data directory, this may take a while... Done!
    Checking if SMC is Glitch or Retail...
    Dumping current SMC... Done!
    Checking SMC...
    SMC is Retail!
    Adding patchsmc to xebuild options!

    Parameters sent to xeBuild:

    -noenter -t glitch2 -c jasper512 -d data -f 14719 -b DD88AD0C9ED669E7B56794FB68563EFA -p -o patchsmc output.bin

    Building nand using xeBuild (this may take a while):

    ---------------------------------------------------------------
    xeBuild v1.02.477
    ---------------------------------------------------------------
    building glitch2 image
    ***** ERROR: CPU key flag -p on command line but no argument provided!
    ---------------------------------------------------------------
    Usage :
    xeBuild -t <type> [<switch> [<switch>...]] <out.bin>

    Example :
    xeBuild -t retail -c trinity -d files -b 0102...0f -p 0102...0f out.bin

    Switches:
    -t <type>: retail, jtag, glitch, glitch2 (defaults to retail)
    -p <key> : 32 character CPU hex key (override, can be in cpukey.txt)
    -b <key> : 32 character 1BL hex key (override, can be in 1blkey.txt)
    -c <con> : console type
    -d <dir> : per build files directory relative to this exe
    -f <dir> : use different data dir and file lists
    -o <opt> : set xeBuild options
    -a <name>: append patches
    -i <ext> : adds _<ext> into firmware ini and patches file names
    -v : shows more info during build process
    -noenter : suppresses prompt for enter key when finished

    -? : shows this info

    <con> = xenon, zephyr, falcon, jasper, jaspersb, jasper256,
    jasper512, jasperbigffs, trinity, corona
    <dir> = directory
    <key> = 128 bit key in hexadecimal representation
    <name> = name.bin contents will be appended to hv/kernel patches

    <out.bin> = optional, overrides auto built output image name
    <ext> = using this option would cause the builder to look for _glitch_<ext>.ini instead of _glitch.ini
    and patches_jasper_<ext>.bin instead of patches_jasper.bin
    <opt> various options can be specified on the command line, see perbox sample ini for descriptions
    listed below, ALL are available to all image types
    the others can be specified but are only used for that specific image type
    ALL = nomobile noremap noecdremap nosecurity nosusecurity nandmu cputemp= gputemp=
    ALL = edramtemp= overcputemp= overgputemp= overedramtemp= cpufan= gpufan= avregion=
    ALL = gameregion= dvdregion= macid= cfldv=
    JTAG = nodvd olddvd cygnos xellbutton= dualboot= dvdkey=
    GLITCH= patchsmc cygnos xellbutton= dvdkey=
    options noted above with an = are expected to be followed with a value
    specifying one of the options without an = is the same as setting TRUE in the ini
    any value assigned to it will be ignored.
    note that command line options take precedence over any values set in perbox ini
    and that only values preceded with 0x will be interpreted as hex, MAC is the only exception
    example: -o macid=00:22:48:F1:01:02;gameregion=0x00FF;nomobile
    example: -o macid=00:22:48:F1:01:02 -o gameregion=0x00FF -o nomobile
    example: -o macid=002248F10102 -o gameregion=255 -o nomobile
    ---------------------------------------------------------------
    xeBuild ERROR: usage/commandline error
    ERROR: There was one or more fatal errors: 1 errors during the build process
    Cleaning data and temporary directories... Done!

    Przy wybraniu rgh 2.0 plik ecc jest generowany, ale niestety posiadam wersje rgh 1:

    ==================================
    Swizzy's xeBuild GUI version 2.061
    Log Started: Tuesday 2012-06-19 09:06:56
    ==================================

    *** Some console information ***
    CB Version: 6753
    ERROR: Unable to decrypt KV using specified CPUKey!
    This means the log will NOT contain information from your keyvault, it can be caused by etheir badkey or b*******/corrupt keyvault
    Using xell-reloaded for Glitch hack
    Including dashlaunch... Done!
    Including custom dashlaunch settings (launch.ini)... Done!
    Copying nand to data directory, this may take a while... Done!
    Checking if SMC is Glitch or Retail...
    Dumping current SMC... Done!
    Checking SMC...
    SMC is Retail!
    Adding patchsmc to xebuild options!

    Parameters sent to xeBuild:

    -noenter -t glitch2 -c jasper512 -d data -f 14719 -b DD88AD0C9ED669E7B56794FB68563EFA -p -o patchsmc output.bin

    Building nand using xeBuild (this may take a while):

    ---------------------------------------------------------------
    xeBuild v1.02.477
    ---------------------------------------------------------------
    building glitch2 image
    ***** ERROR: CPU key flag -p on command line but no argument provided!
    ---------------------------------------------------------------
    Usage :
    xeBuild -t <type> [<switch> [<switch>...]] <out.bin>

    Example :
    xeBuild -t retail -c trinity -d files -b 0102...0f -p 0102...0f out.bin

    Switches:
    -t <type>: retail, jtag, glitch, glitch2 (defaults to retail)
    -p <key> : 32 character CPU hex key (override, can be in cpukey.txt)
    -b <key> : 32 character 1BL hex key (override, can be in 1blkey.txt)
    -c <con> : console type
    -d <dir> : per build files directory relative to this exe
    -f <dir> : use different data dir and file lists
    -o <opt> : set xeBuild options
    -a <name>: append patches
    -i <ext> : adds _<ext> into firmware ini and patches file names
    -v : shows more info during build process
    -noenter : suppresses prompt for enter key when finished

    -? : shows this info

    <con> = xenon, zephyr, falcon, jasper, jaspersb, jasper256,
    jasper512, jasperbigffs, trinity, corona
    <dir> = directory
    <key> = 128 bit key in hexadecimal representation
    <name> = name.bin contents will be appended to hv/kernel patches

    <out.bin> = optional, overrides auto built output image name
    <ext> = using this option would cause the builder to look for _glitch_<ext>.ini instead of _glitch.ini
    and patches_jasper_<ext>.bin instead of patches_jasper.bin
    <opt> various options can be specified on the command line, see perbox sample ini for descriptions
    listed below, ALL are available to all image types
    the others can be specified but are only used for that specific image type
    ALL = nomobile noremap noecdremap nosecurity nosusecurity nandmu cputemp= gputemp=
    ALL = edramtemp= overcputemp= overgputemp= overedramtemp= cpufan= gpufan= avregion=
    ALL = gameregion= dvdregion= macid= cfldv=
    JTAG = nodvd olddvd cygnos xellbutton= dualboot= dvdkey=
    GLITCH= patchsmc cygnos xellbutton= dvdkey=
    options noted above with an = are expected to be followed with a value
    specifying one of the options without an = is the same as setting TRUE in the ini
    any value assigned to it will be ignored.
    note that command line options take precedence over any values set in perbox ini
    and that only values preceded with 0x will be interpreted as hex, MAC is the only exception
    example: -o macid=00:22:48:F1:01:02;gameregion=0x00FF;nomobile
    example: -o macid=00:22:48:F1:01:02 -o gameregion=0x00FF -o nomobile
    example: -o macid=002248F10102 -o gameregion=255 -o nomobile
    ---------------------------------------------------------------
    xeBuild ERROR: usage/commandline error
    ERROR: There was one or more fatal errors: 1 errors during the build process
    Cleaning data and temporary directories... Done!


    ****** The app has now finished! ******
     
  5. -=DEXTER=-

    -=DEXTER=- Pomocnik Pomocnik Użytkownik

    Dołączył:
    Styczeń 8, 2008
    Posty:
    7158
    Polubienia:
    552
    Punkty za osiągnięcia:
    113
    Miasto:
    Kalisz, Poland
    Bo masz dash 14717 lub 14719, na tym zrobisz tylko RGH 2.0

    Wysyłane z mojego GT-N7000 za pomocą Tapatalk 2
     
  6. akir

    akir Xbox One Xbox One V.I.P Pomocnik Użytkownik PSforum.pl

    Dołączył:
    Grudzień 23, 2008
    Posty:
    12080
    Polubienia:
    1068
    Punkty za osiągnięcia:
    113
    Miasto:
    Bielsko-Biała
    Pisze jak wół, ze masz 6753cb. Wiec rgh 2.0

    Wysłane z mojego LG-P500 za pomocą Tapatalk
     
  7. pawel_wolomin

    pawel_wolomin Świeżak Świeżak

    Dołączył:
    Sierpień 31, 2009
    Posty:
    18
    Polubienia:
    0
    Punkty za osiągnięcia:
    1
    Dziękuje za info, w takim razie czekam na nowego coolrunera pod rgh 2
     
  8. opeael2

    opeael2 Pomocnik Pomocnik XBOX MANIAK Użytkownik PSforum.pl

    Dołączył:
    Styczeń 31, 2010
    Posty:
    6154
    Polubienia:
    390
    Punkty za osiągnięcia:
    83
    Płeć:
    Mężczyzna
    Miasto:
    Nidzica
    A po co ci nowy coolrunner. Mozna na starym

    Wysłane z mojego GT-I5700 za pomocą Tapatalk
     
Wczytywanie...

Poleć forum