cos jest tu zle? niech ktoś spojrzy swiezym okiem.
[LiNK] TUTORIAL Krok po kroku
- Thread starter zOnk31
- Rozpoczęty
cos jest tu zle? niech ktoś spojrzy swiezym okiem.
Wyczytałem, że powodem tego, że LINK nie działa tak jak powinien, jest to, że trzeba dograć Update Avatar-ów. Jak to się robi przy FSD3, bo przeczytałem już wszystko co się da i próbowałem jak się da i nie da się. Czy ktoś po przejściu na FSD3 robił update Avatar-ów.?????
fsd nie jest w wersji 483.A ja mam taki problem-pytanie bo wszystko super odblokowane porty zalozone konto i zalogowane na fsd a jak wchodze w gre i przyciskam GUIDE nie mam system linkaczego to jest wina? fsd mam na dysku zewnetrzym w folderze innym niz FREESTYLE czy to to?
przeinstaluj jeszcze raz
Ok bo na dysku konsoli mam katalogi FREESTYLE i tam jest stare FSD2.2 oraz katalot FREESTYLE3 i tam mam FSD 3r58 a podlaczylem zewnetrzny dysk wlasnie z FSD 3r483 i to FSD jest w jakim tam katalogu o dlugiej nazwie czyli mam wrzucic na dysk konsoli katalog FREESTYLE z 3r483 przez xexmenu i pozbyc sie innyc wersji? dobrze rozumiem? czy jakos inaczej to trzeba zainstalowac?
z0nk31, może napisz nam swoje parametry, ale nie konsoli, a np. routera? dostawcy internetu? itd. itp. Moze tu gdzieś jest powód, że nam nie działa, a Tobie śmiga?
Poddaję się!Spoko udalo mi sie
Wrzuć proszę swój plik ini. Może to coś da??? Dzięki!
Qba
przewiń w FSD do zakładki SETTINGS potem przejdź do zakładki CREDITS
w prawym dolnym rogu będziesz mieć wypisane info, między innymi nr i wersję FSD
Sprawdź czy masz 3.0b ref 483
u mnie jest net w 'Toya', 15mb rozdzielany routerem D-Link dir 300
przewiń w FSD do zakładki SETTINGS potem przejdź do zakładki CREDITS
w prawym dolnym rogu będziesz mieć wypisane info, między innymi nr i wersję FSD
Sprawdź czy masz 3.0b ref 483
u mnie jest net w 'Toya', 15mb rozdzielany routerem D-Link dir 300
Teraz mam dokładnie 483, bo wykosiłem tak jak pisaliście i skopiowałem najnowsze, że już nie robiło żadnych updat-ów.
sprawdzałeś w FSD test portów ? co Ci wyskoczyło ?
mój launch.ini wygląda tak:
; launch.xex V3.0 config file
; parsed by simpleIni http://code.jellycan.com/simpleini/
; currently supported devices and paths:
; internal hard disk Hdd:\
; usb memory stick Usb:\
; memory unit Mu:\
; USB memory unit UsbMu:\
; big block NAND mu FlashMu:\
; internal slim 4G mu IntMu:\
; internal corona 4g mu MmcMu:\
; CD/DVD Dvd:\ (not recommended to use this one)
; buttons can point to any xex, or any CON with default.xex in it on any of the above devices
; note that Right Bumper is ALWAYS default to return NXE
; if you want to assign an additional one, use the path Sfc:\dash.xex ie:
; BUT_A = Sfc:\dash.xex
; all comments and fields in this file are optional, you can remove anything you don't need
; sorry for any double negatives
; njoy, cOz
; example entry
; Default = Hdd:\FreeStyle\default.xex
[Paths]
BUT_A =
BUT_B =
BUT_X =
BUT_Y =
Start =
Back =
LBump =
RThumb =
LThumb =
; Default is what loads when you hold no buttons
; leave this blank if you want NXE as default
Default = Hdd:\Freestyle\default.xex
; at boot time, default can be overridden based on how the console is turned on
; if you start with wired/wireless/IR guide button, this item if existing will be used instead of default
; note that the Guide item is ALWAYS overridden by option: remotenxe = true
Guide =
; if you power on with the button on the front of the console (or the power button on a remote if remotenxe is not set to true)
; this item will be used instead of default
Power =
; if set, going to system settins from HUD will run this app, override with Right Bumper
Configapp =
; if set, this will be run as a title before any other option occurs, does not get circumvented by held buttons or default
; guide/power opts are processed after this; intended for a short video player to allow replacing bootanim
Fakeanim =
; by default this only dumps to UART, setting a file here will cause unhandled exception info to be dumped
; as text to a file. Same path restraints as the quick launch buttons.
; if exchandler is set to false, this option does nothing.
; note that this uses the first drive of the class found, so if you use usb: and have more than one usb device
; it may wind up on any of the usb devices depending on which was enumerated first. The path for the file is only
; checked on boot, so the device must be present at power on and at crash time for this to be effective
; ie: dumpfile = Usb:\crashlog.txt
Dumpfile =
; example plugin entry
; plugin1 = Usb:\plugin\aplugin.xex
[Plugins]
plugin1 =
plugin2 =
plugin3 =
plugin4 =
plugin5 =
; these options are never used directly by dash launch but serve to give the configuration program
; a place to keep these values
[Externals]
; if true, the configuration application will start a FTP server (user/pass: xbox)
; if not present default is FALSE
ftpserv = false
; if ftpserv is true, this is the port that will be used by the FTP server
; if not present default is 21
ftpport = 21
; if true, the configuration application will start in launch mode instead of options mode
; if not present default is FALSE
calaunch = false
; if true, temps in installer and in guide (shuttemps option) will be shown in farenheit instead of celcius
; if not present default is FALSE
farenheit = false
[Settings]
; if true, brining up miniblade in NXE and then pressing Y will cause launch.xex to relaunch for you
; note you must release Y button then press desired QuickLaunchButtons after or use default item
; if not present default is TRUE
nxemini = true
; if true ping limit will be removed for system link play (thanks FBDev!)
; if not present default is FALSE
pingpatch = true
; if true (most) xbla will no longer need yaris patching (thanks mojobojo!)
; if not present default is FALSE
contpatch = false
; Normally when a fatal error occurs the xbox will just freeze, setting this to false will cause a reboot or powerdown
; setting to TRUE will also disable the unhandled exception filter which tries to intercept recoverable unhandled exceptions with exit to dash
; if not present default is FALSE
fatalfreeze = false
; when fatalfreeze is set to false, setting this to true will cause the box to reboot, setting it to false will instead have the box shut down
; note that this option does NOTHING when fatalfreeze is set to true
; if not present default is FALSE
fatalreboot = false
; setting this to true will cause the box to reboot (soft reboot) the way it was intended to
; on jtag ONLY set this to true if using blackaddr's reboot fix for SMC, else on reboot you will get E71 and corrupted dash/video/etc settings
; if not present default is TRUE
safereboot = true
; when set to true, it is possible to hold RB when launching a game to have the region that the game gets from xam spoofed
; if not present this is set to FALSE
regionspoof = false
; when regionspoof is true, you set your region here in hex preceding the value with 0x, for examle devkit would be region = 0x7fff
; if not present but regionspoof is set to true, this is set to 0x7FFF
region = 0x7fff
; when set to false, ejecting a dvd video or game returns you to your default item, set to true to auto exit to NXE
; if not present this is set to FALSE
dvdexitdash = false
; when set to false, using the exit item in an XBLA game returns you to your default item, set to true to exit to NXE arcade menu
; if not present this is set to FALSE
xblaexitdash = false
; when set to true, using miniblades system setting options will not exit to NXE
; if not present this is set to FALSE
nosysexit = false
; when set to true, miniblades will not appear... ever (requested as child saftey measure)
; note that using this option overrides everything in dash launch that relies on miniblade exits to function
; if not present this is set to FALSE
nohud = false
; when set to false, xbox will be capable of finding system updaters
; if not present this is set to TRUE
noupdater = true
; when set to true, dash launch will put all debug strings out to uart
; if not present this is set to FALSE
debugout = true
; when set to false, dash launch will not attempt to handle last chance unhandled exceptions
; if set to false, exceptions will also not be dumped to the dumpfile
; if not present this is set to TRUE
exchandler = true
; if set to true, this will block the console from resolving LIVE related dns
; if not set this value will be TRUE
liveblock = true
; if liveblock is set to true, this will block the console from resolving all MS related dns
; setting this to TRUE will also block apps like freestyle from accessing things like cover images
; *** note that if NO INI is present for launch.xex, this is set to TRUE
; if not set this value will be FALSE
livestrong = false
; when set to TRUE the X (guide) and power button on IR remotes will cause the xbox to boot to NXE instead of default item
; note that powering on with the windows/start button automatically goes to NXE's media center now regardless of how this is set
; if not set this value will be FALSE
remotenxe = false
; when set to TRUE all USB drives will be polled at hddtimer intervals for the file "alive.txt" in their root
; if the file exists, it will be recreated and 16 random bytes written to it on each poll which should keep drives from spinning down
; if not set this value will be FALSE
hddalive = false
; in seconds, the interval between when USB devices will be polled for "alive.txt" file
; if not set and hddalive is set to TRUE this value will be 210
hddtimer = 210
; attempts to disable popups related to signing in, like "live is blocked" and similar
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S A LOGIN DIALOG MAY NOT BE PERFECT !!
; !! to sign into live profiles other than auto signing on boot you MUST accept the 'check live for updates' dialog BEFORE enabling this option !!
; if not set this value will be FALSE
signnotice = false
; when you hold guide button to shut down xbox, normally the 'cancel' option is selected
; setting this to TRUE will cause the shutdown option to be auto selected instead
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!
; if not set this value will be FALSE
autoshut = false
; when you hold guide button to shut down xbox, normally a dialog comes up
; setting this to TRUE will cause the console to shutdown instead of show a dialog
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!
; if not set this value will be FALSE
autooff = false
; 14699+ has native http functions, but you are forced to be logged into use them
; this patch removes that restriction, set to false to disable it if you have any problems
; if not set this value will be TRUE
xhttp = true
; when tempbcast is set to TRUE the raw temp data from smc will be broadcast over UDP at temptime second
; intervals on port tempport
; if not set this value will be FALSE
tempbcast = false
; if not set this value will be 10
temptime = 10
; if not set this value will be 7030
tempport = 7030
; when set to TRUE all titles will have the insecure socket priveledge
; if not set this value will be FALSE
sockpatch = false
; when set to TRUE dash launch will not erase launchdata before launching a quick launch item
; if not set this value will be FALSE
passlaunch = false
; when set to TRUE various functions will be spoofed to make firmware think it's connected to LIVE
; this does not compensate for the fact that it cannot contact LIVE servers
; setting this to TRUE forces liveblock to TRUE
; if not set this value will be FALSE
fakelive = false
; when set to TRUE network/cloud storage options should not show up in disk dialogs
; if not set this value will be TRUE
nonetstore = true
; when set to TRUE a snapshot of the console temperature data will be displayed in the console shutdown dialog (displayed when guide button is held)
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!
; enabling this option disables autooff
; if not set this value will be FALSE
shuttemps = false
; when true, any devkit profiles on the console will not appear as corrupt and can be used
; any changes such as saving games or getting achievements will resign the profile with the current/retail keyvault
; this seems not to affect glitch/jtag dev crossflash, but could affect these profiles on true devkits
; if not set this value will be FALSE
devprof = false
; when true, system link data will be encrypted for communication with devkits
; if not set this value will be FALSE
devlink = false
; when true dash launch will perform automatic disk swapping
; WARNING!! do not enable if you use FSD or swap.xex for this !!
; if not set this value will be FALSE
autoswap = false
; when true, disables kinect health pseudo video at game launch
; if not set this value will be TRUE
nohealth = true
; when true, disables dash locale setup screens when settings already exist
; if not set this value will be TRUE
nooobe = true
; shen true dash launch will automatically enable fakelive functionality only during official dash and indie play sessions
; if not set this value will be FALSE
autofake = false
mój launch.ini wygląda tak:
; launch.xex V3.0 config file
; parsed by simpleIni http://code.jellycan.com/simpleini/
; currently supported devices and paths:
; internal hard disk Hdd:\
; usb memory stick Usb:\
; memory unit Mu:\
; USB memory unit UsbMu:\
; big block NAND mu FlashMu:\
; internal slim 4G mu IntMu:\
; internal corona 4g mu MmcMu:\
; CD/DVD Dvd:\ (not recommended to use this one)
; buttons can point to any xex, or any CON with default.xex in it on any of the above devices
; note that Right Bumper is ALWAYS default to return NXE
; if you want to assign an additional one, use the path Sfc:\dash.xex ie:
; BUT_A = Sfc:\dash.xex
; all comments and fields in this file are optional, you can remove anything you don't need
; sorry for any double negatives
; njoy, cOz
; example entry
; Default = Hdd:\FreeStyle\default.xex
[Paths]
BUT_A =
BUT_B =
BUT_X =
BUT_Y =
Start =
Back =
LBump =
RThumb =
LThumb =
; Default is what loads when you hold no buttons
; leave this blank if you want NXE as default
Default = Hdd:\Freestyle\default.xex
; at boot time, default can be overridden based on how the console is turned on
; if you start with wired/wireless/IR guide button, this item if existing will be used instead of default
; note that the Guide item is ALWAYS overridden by option: remotenxe = true
Guide =
; if you power on with the button on the front of the console (or the power button on a remote if remotenxe is not set to true)
; this item will be used instead of default
Power =
; if set, going to system settins from HUD will run this app, override with Right Bumper
Configapp =
; if set, this will be run as a title before any other option occurs, does not get circumvented by held buttons or default
; guide/power opts are processed after this; intended for a short video player to allow replacing bootanim
Fakeanim =
; by default this only dumps to UART, setting a file here will cause unhandled exception info to be dumped
; as text to a file. Same path restraints as the quick launch buttons.
; if exchandler is set to false, this option does nothing.
; note that this uses the first drive of the class found, so if you use usb: and have more than one usb device
; it may wind up on any of the usb devices depending on which was enumerated first. The path for the file is only
; checked on boot, so the device must be present at power on and at crash time for this to be effective
; ie: dumpfile = Usb:\crashlog.txt
Dumpfile =
; example plugin entry
; plugin1 = Usb:\plugin\aplugin.xex
[Plugins]
plugin1 =
plugin2 =
plugin3 =
plugin4 =
plugin5 =
; these options are never used directly by dash launch but serve to give the configuration program
; a place to keep these values
[Externals]
; if true, the configuration application will start a FTP server (user/pass: xbox)
; if not present default is FALSE
ftpserv = false
; if ftpserv is true, this is the port that will be used by the FTP server
; if not present default is 21
ftpport = 21
; if true, the configuration application will start in launch mode instead of options mode
; if not present default is FALSE
calaunch = false
; if true, temps in installer and in guide (shuttemps option) will be shown in farenheit instead of celcius
; if not present default is FALSE
farenheit = false
[Settings]
; if true, brining up miniblade in NXE and then pressing Y will cause launch.xex to relaunch for you
; note you must release Y button then press desired QuickLaunchButtons after or use default item
; if not present default is TRUE
nxemini = true
; if true ping limit will be removed for system link play (thanks FBDev!)
; if not present default is FALSE
pingpatch = true
; if true (most) xbla will no longer need yaris patching (thanks mojobojo!)
; if not present default is FALSE
contpatch = false
; Normally when a fatal error occurs the xbox will just freeze, setting this to false will cause a reboot or powerdown
; setting to TRUE will also disable the unhandled exception filter which tries to intercept recoverable unhandled exceptions with exit to dash
; if not present default is FALSE
fatalfreeze = false
; when fatalfreeze is set to false, setting this to true will cause the box to reboot, setting it to false will instead have the box shut down
; note that this option does NOTHING when fatalfreeze is set to true
; if not present default is FALSE
fatalreboot = false
; setting this to true will cause the box to reboot (soft reboot) the way it was intended to
; on jtag ONLY set this to true if using blackaddr's reboot fix for SMC, else on reboot you will get E71 and corrupted dash/video/etc settings
; if not present default is TRUE
safereboot = true
; when set to true, it is possible to hold RB when launching a game to have the region that the game gets from xam spoofed
; if not present this is set to FALSE
regionspoof = false
; when regionspoof is true, you set your region here in hex preceding the value with 0x, for examle devkit would be region = 0x7fff
; if not present but regionspoof is set to true, this is set to 0x7FFF
region = 0x7fff
; when set to false, ejecting a dvd video or game returns you to your default item, set to true to auto exit to NXE
; if not present this is set to FALSE
dvdexitdash = false
; when set to false, using the exit item in an XBLA game returns you to your default item, set to true to exit to NXE arcade menu
; if not present this is set to FALSE
xblaexitdash = false
; when set to true, using miniblades system setting options will not exit to NXE
; if not present this is set to FALSE
nosysexit = false
; when set to true, miniblades will not appear... ever (requested as child saftey measure)
; note that using this option overrides everything in dash launch that relies on miniblade exits to function
; if not present this is set to FALSE
nohud = false
; when set to false, xbox will be capable of finding system updaters
; if not present this is set to TRUE
noupdater = true
; when set to true, dash launch will put all debug strings out to uart
; if not present this is set to FALSE
debugout = true
; when set to false, dash launch will not attempt to handle last chance unhandled exceptions
; if set to false, exceptions will also not be dumped to the dumpfile
; if not present this is set to TRUE
exchandler = true
; if set to true, this will block the console from resolving LIVE related dns
; if not set this value will be TRUE
liveblock = true
; if liveblock is set to true, this will block the console from resolving all MS related dns
; setting this to TRUE will also block apps like freestyle from accessing things like cover images
; *** note that if NO INI is present for launch.xex, this is set to TRUE
; if not set this value will be FALSE
livestrong = false
; when set to TRUE the X (guide) and power button on IR remotes will cause the xbox to boot to NXE instead of default item
; note that powering on with the windows/start button automatically goes to NXE's media center now regardless of how this is set
; if not set this value will be FALSE
remotenxe = false
; when set to TRUE all USB drives will be polled at hddtimer intervals for the file "alive.txt" in their root
; if the file exists, it will be recreated and 16 random bytes written to it on each poll which should keep drives from spinning down
; if not set this value will be FALSE
hddalive = false
; in seconds, the interval between when USB devices will be polled for "alive.txt" file
; if not set and hddalive is set to TRUE this value will be 210
hddtimer = 210
; attempts to disable popups related to signing in, like "live is blocked" and similar
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S A LOGIN DIALOG MAY NOT BE PERFECT !!
; !! to sign into live profiles other than auto signing on boot you MUST accept the 'check live for updates' dialog BEFORE enabling this option !!
; if not set this value will be FALSE
signnotice = false
; when you hold guide button to shut down xbox, normally the 'cancel' option is selected
; setting this to TRUE will cause the shutdown option to be auto selected instead
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!
; if not set this value will be FALSE
autoshut = false
; when you hold guide button to shut down xbox, normally a dialog comes up
; setting this to TRUE will cause the console to shutdown instead of show a dialog
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!
; if not set this value will be FALSE
autooff = false
; 14699+ has native http functions, but you are forced to be logged into use them
; this patch removes that restriction, set to false to disable it if you have any problems
; if not set this value will be TRUE
xhttp = true
; when tempbcast is set to TRUE the raw temp data from smc will be broadcast over UDP at temptime second
; intervals on port tempport
; if not set this value will be FALSE
tempbcast = false
; if not set this value will be 10
temptime = 10
; if not set this value will be 7030
tempport = 7030
; when set to TRUE all titles will have the insecure socket priveledge
; if not set this value will be FALSE
sockpatch = false
; when set to TRUE dash launch will not erase launchdata before launching a quick launch item
; if not set this value will be FALSE
passlaunch = false
; when set to TRUE various functions will be spoofed to make firmware think it's connected to LIVE
; this does not compensate for the fact that it cannot contact LIVE servers
; setting this to TRUE forces liveblock to TRUE
; if not set this value will be FALSE
fakelive = false
; when set to TRUE network/cloud storage options should not show up in disk dialogs
; if not set this value will be TRUE
nonetstore = true
; when set to TRUE a snapshot of the console temperature data will be displayed in the console shutdown dialog (displayed when guide button is held)
; !! WARNING OTHER THINGS DO USE THIS DIALOG AND DETECTING THAT IT'S SHUTDOWN DIALOG MAY NOT BE PERFECT !!
; enabling this option disables autooff
; if not set this value will be FALSE
shuttemps = false
; when true, any devkit profiles on the console will not appear as corrupt and can be used
; any changes such as saving games or getting achievements will resign the profile with the current/retail keyvault
; this seems not to affect glitch/jtag dev crossflash, but could affect these profiles on true devkits
; if not set this value will be FALSE
devprof = false
; when true, system link data will be encrypted for communication with devkits
; if not set this value will be FALSE
devlink = false
; when true dash launch will perform automatic disk swapping
; WARNING!! do not enable if you use FSD or swap.xex for this !!
; if not set this value will be FALSE
autoswap = false
; when true, disables kinect health pseudo video at game launch
; if not set this value will be TRUE
nohealth = true
; when true, disables dash locale setup screens when settings already exist
; if not set this value will be TRUE
nooobe = true
; shen true dash launch will automatically enable fakelive functionality only during official dash and indie play sessions
; if not set this value will be FALSE
autofake = false
Nie. okładek też mi nie pobiera... Dns wpisać recznie w dashboard'zie? W połączeniu z siecią?
Edit:
Chyba nic z tego jak robie test w F3plugin nie wykrywa mi portów. Jest jakaś możliwość odblokowania ich posiadając modem USB?
A i DNS wklepałem podstawowy i zapasowy... Jak miałem xboxlive to wszystko było ustawiane automatycznie i jakoś śmigalo.
Edit:
Chyba nic z tego jak robie test w F3plugin nie wykrywa mi portów. Jest jakaś możliwość odblokowania ich posiadając modem USB?
A i DNS wklepałem podstawowy i zapasowy... Jak miałem xboxlive to wszystko było ustawiane automatycznie i jakoś śmigalo.
Odp: [LiNK]Tutorial Krok po kroku
spróbuj odblokowac porty w zaporze systemowej na lapku.
Wysyłane z mojego MT11i za pomocą Tapatalk 2
spróbuj odblokowac porty w zaporze systemowej na lapku.
Wysyłane z mojego MT11i za pomocą Tapatalk 2
To da radę jakaś tęga głowa mi pomóc?
Założyłem konto na link.jqe360.com. Zaktualizowałem FSD w konsoli do 3.0b Rev483.
Jak już pisałem wcześniej posiadam internet z modemem USB. Podpinam konsole do lapciaka kablem ethernet. W dolnym lewym rogu ekranu x'a wyświetla się adres IP.
Wchodzę w ustawienia FSD>General settings>JQE360.com>wpisuje login i hasło klikam na Link Console to JQE360 i nie dzieje się nic. Dane wpisuje na 100% poprawne ponieważ z poziomu komputera na stronkę loguj się bezproblemowo. Wie ktoś może jaka jest tego przyczyna? I zapytam jeszcze raz czy na takim modemie USB da się w jakiś "magiczny" sposób odblokować porty 3072 i 3071? Może to właśnie wina tych portów i trzeba je uprzednio jakoś odblokować... Będę bardzo wdzięczny za pomoc.
Założyłem konto na link.jqe360.com. Zaktualizowałem FSD w konsoli do 3.0b Rev483.
Jak już pisałem wcześniej posiadam internet z modemem USB. Podpinam konsole do lapciaka kablem ethernet. W dolnym lewym rogu ekranu x'a wyświetla się adres IP.
Wchodzę w ustawienia FSD>General settings>JQE360.com>wpisuje login i hasło klikam na Link Console to JQE360 i nie dzieje się nic. Dane wpisuje na 100% poprawne ponieważ z poziomu komputera na stronkę loguj się bezproblemowo. Wie ktoś może jaka jest tego przyczyna? I zapytam jeszcze raz czy na takim modemie USB da się w jakiś "magiczny
" sposób odblokować porty 3072 i 3071? Może to właśnie wina tych portów i trzeba je uprzednio jakoś odblokować... Będę bardzo wdzięczny za pomoc.